Skip to Content

Barn Wood

hand plane for wood

Love the look of old barn wood? Our barn wood has the rustic look, without the worry.

Unlike reclaimed barn wood that can present a number of issues like crooked boards, curling, dirt, and insects, we hand-craft antiqued, distressed barn wood from our fine pine wood, harvested from the woods of Michigan. Choose your texture and pre-finishing to create the rustic barn wood look of your choosing.

Request a Quote

Weathered Barn Wood Features

  • 2-12' lengths

  • Sizes: 1x6, 1x8, 1x12

  • Tongue & Groove, Center matched, Butt ends square end-matched for minimal waste

Circle Sawn Barn Wood Features

  • Circle sawn texture created by sawmills leaving circular blade markings on the face of the board to create a rustic texture in the graining patterns

  • 8' lengths

  • Random Widths: 4", 6", 8", and 10"

  • Random thickness ¾" - 1 ⅛"

  • Tongue & Groove, End-matched, Blind nailing

Barn Wood Colors

Weathered grey
Weathered Grey
Weathered red
Weathered Red
Weathered brown
Weathered Brown

Barn Wood Sizes

Size Pine Interior Stained Exterior Stained Coverage
1 x 6 X X X 5 ⅛"
1 x 8 X X X 6 ¾"
1 x 12 X X X 10 ¾"

Popular Circle Sawn Barn Wood Colors

Warm walnut
Warm Walnut
Stone grey
Stone Grey
White wash
White Wash


Barn Wood Siding

Request a Quote

Contact Information
Either Square Footage or Linear Footage must be specified.
Either Square Footage or Linear Footage must be specified.

Order Considerations

How to measure your home for Barn Wood

The easiest way to measure your walls for our paneling is using the square foot method. To figure the square footage that a wall covers, you simply measure the length of the wall and multiply that by the height of the wall. Each wall should be measured and calculated individually deducting the window and door openings for an exact square footage figure.

Standard Wall Measurements Diagram

Standard Wall

In the example above there is an overall wall length of 20’ and a wall height of 8’, there is also a standard door that is 3’ wide x 7’ tall and a window that is 5’ wide by 4’ tall. To figure the overall square footage, multiply the length of the wall by the height of the wall (20 x 8 = 160 sq. ft.). The next step is to deduct the window and door openings out of the overall wall square footage (3 x 7 = 21 sq. ft. for the door plus 5 x 4 = 20 sq. ft. for the window for a total of 41 sq. ft. of deductions). You would then subtract the window and door sq. ft. total from the overall wall sq. ft. to get the final square footage amount (160 sq. ft. for the wall minus 41 sq. ft. for the window & door openings = 119 sq. ft.) There is a total of 119 sq. ft. of paneling needed to cover this wall.

Gabled Wall Measurements Diagram

Gabled Wall

Figuring the square footage on a gabled wall is a bit more difficult but the same principles apply. Multiply the length of the wall by the wall height to get the overall sq. ft. and subtract the window openings (24 x 10 = 240 sq. ft. minus the 40 sq. ft. windows = 200 sq. ft.). The peak is the tricky part, multiply half of the overall wall length (12’) by the vertical distance from the wall height to the peak (8’) to get the gable end’s square footage (12 x 8 = 96 sq. ft.). Then add 20% on the gable to cover the waste of all those angle cuts (96 x 20% = 115 sq. ft.). Finally, add the wall sq. ft. and the gable sq. ft. together to get the final square footage amount (200 + 115 = 315 sq. ft.). There is a total of 315 sq. ft. of paneling needed to cover this gabled wall.


related Blog Posts

Northern Log Supply’s barn wood siding has the rustic look without the worries of reclaimed barn wood.

Reclaimed barn wood offers a weathered look that can instantly give a home a rustic, vintage vibe. However, homeowners and contractors alike run a few risks when purchasing reclaimed barn wood.